11 Tips for Miter Saw

A miter saw is a power tool that is counted in the top 10 power tools in 2020 and it is also useful for the home improvement.

Here, are some tips for using the miter saw that will help you to give the best results from your cuts.

  1. Let the blade stop:

You should wait for the blade to stop spinning fully. Another point to remember is to keep the miter saw’s blade in the downward position. If you pull the blade out from the material while spinning it can be possible that the tooth of the blades can broken or even harm you also.

So, just remember: Do not uplift the blade until it stops. Do the cut, let the trigger to go of and count to ten. It’s not that hard, is it?

  1. Mark the danger zones

While working on the miter saw, you concentrate only on your cuttings and forget the danger zones. To prevent from this, mark the lines with the red colour on the surface and fence of your miter saw. This will indicate you the danger zone and prevent you to avoid mistakes while working on the miter saw.

  1. For Repeat Cuts Use Stop Blocks

Besides the cutting, mostly woodworkers perform the repetitive cuts. Some projects such as garden cabinet, outdoor beverage table, DIY dog gate and outdoor coffee table comprises of many repetitive cuts. Despite of measuring each time, you should measure once and set up a stopper.

A stopper is a piece of wood from the scrap. Once the installation of the stopper is done than it would help you to cut multiple pieces of wood of same length.

This will guarantee you provide you the proper pieces along with that it will save you time.

  1. Use the block to Set Bevel Angles

Before the miter saw, there was no tool that can facilitate us to cut on different angles. It was difficult to cut the wood or other material at the angles but it can only possible with this power tool. It can be much easier by placing the block at the required angle.

To build the block, cut the block at 90-degree angle with no tilt. Then rotate the saw at the angle you want and it down.

  1. Mark the line on the blade

While making the cuts, your hands can shiver due to which you cannot get the proper and finished cuts. To avoid this, mark the straight line on the blade which help you to get the finish cuts.

  1. Use the stand that can move

Usually on the job site you need to constantly move the miter saw. The mobile stand will help in this way. You can easily adjust the miter saw the way you want. With the movable miter saw the task becomes as easy as eating the pie.

  1. You can install the laser

It helps to light the line of thin length across the work piece. It helps you to cut faster and in the exact line of the cut you want.

  1. Just allow the blade of the miter saw have the maximum speed

It is one of the most important tips concerning the safety measures. Once you switch on the miter saw you generally wait for it to have the maximum speed before you make cut on the work piece. Some miter saw make the smooth cut and some will not.

After you have made the cut all you need is to release your hands from the miter saw trigger and make sure to slow down the blade itself. Before the blade actually comes to rest if you lift the blade causes the off cuts fly off the table.

  1. Buy the saw that have double tilt

Double tilt saw or double bevel saw is much more useful than a single tilt saw. This make easier to have the bevel cuts. But if a single tilt saw is used with the better blade quality then it can make the good cuts.

  1. Know your hook angle

Blade with the good positive hook angle of 10 degree make the aggressive cuts on the wood. It is best to keep the angle of the blade up to 10 degree to -5 degree.

  1. Extend the support

Generally, the miter saw table is 18″ wide and some include the wings that extended in nature that is use to add another foot. Add the couple of scrap wood block that matches the saw table height by placing them near the board ends.

BONUS:

If you are working with any woodworking tool, its important to think first on the safety. Always read the instruction carefully and follow them strictly. If you are nor able to understand then contact to pro or watch videos online (YouTube will the best source).

You also need to protect your ears as miter saws makes a loud noise with the hearing protection, and your eyes with safety glasses.

CONCLUSION:

It is believed that now you are much more informed about how we use the miter saw and what the tasks it can perform and what cannot. So, make sure that the miter saw is according to your needs and ensure what tasks you are going to perform with this amazing power tool.

All you need to do is to have a look on the list to know more about the product and best tools at your side. Also make sure that you have the quality product in your collection in affordable amount. This is the tip that can be useful considering the other tools also.

Wallpaper Tips for Your Home Remodeling Jobs

Putting wallpaper on your walls is one of the easiest and quickest ways to completely change the mood and appearance of a room. Wallpaper comes in a wide variety of styles, textures, colors, and designs. Here is some things you need to know to select and buy the right wallpaper for the job.

First of all, you need to estimate how much wallpaper is going to be needed for the project at hand. So here is a general formula to help you find out. First measure the height and width that needs to be covered. Then be sure to add an extra 10 — 15% to cover for waste. Once you have this number you can divide it by the square footage rating of whatever paper that you choose. That should give you the figure of how many rolls of wallpaper you are going to need.

Actually it’s not a bad idea to add on a few that extra rolls too, especially if you have a complex pattern that requires it. And besides, you may need to make repairs in the future anyway, so having an extra roll or two available can come in very handy later on.

One warning to be aware of regarding wallpaper is that due to the production process, rolls that may appear to be similar in the store will not always look that way when you actually get them on the wall. That’s why wallpaper rolls come in what is called dye lots that identify the rolls that actually match. So be sure as you go through and select your wallpaper, that you look for the rolls that all come from the same dye lot.

Most modern vinyl wallpapers already have paste on the back, so it’s just a matter of soaking them in water and hanging them on the wall. However there are different kinds of papers that are available. Solid vinyl papers are the most common of all these days, as they are very durable, washable, and easy to hang. There are also other papers that are simply vinyl coated and so therefore are somewhat less durable but still fine for most uses.

More expensive papers include embossed paper that has a raised pattern on it, and it is also easy to hang. Some papers are made of grasscloth, and are especially useful for covering walls that have imperfections or are damaged.

Foil wallpaper is very expensive, although it can quickly brighten up and change a small room if used correctly. Some also like to use fabric wallpaper, but just keep in mind that it does not clean very well or easily, and it can be extremely difficult to hang.

Generally speaking, most wallpaper hangers find that working in a clockwise direction around the room is best for right handed people, and going counterclockwise works best for left-handed people. Wherever you start in the room is largely up to you, but try to select a major focal point to begin with.

Selecting and hanging wallpaper is well within the reach of most homeowners. So it is one of those home improvement projects that almost anyone can do with a little determination and practice. So why not give it a try in your home?

DIY Home Renovation Tips

Home renovation often increases property value. This is one of the most common reasons for renovations, in addition to updating a home and making it more suited to your personal tastes. When it comes to renovations, some homeowners opt to utilise the services of professional contractors. Renovation projects can be very costly, especially where you enlist the services of a professional builder, interior designer or other specialist. This is why some people prefer DIY (do it yourself) renovations, which can be more cost effective, especially where you have the skills to do some of the tasks. So if you are thinking of DIY home renovations, here is a list of renovation tips that may help you renovate your home.

Plan

Having a plan for each step of your renovation allows you to renovate in a more cost effective manner, giving you the ability to budget accordingly before you start the project; an outline of the project will help during the renovations.

Appropriating funds from your budget is extremely important. Kitchens and bathrooms are huge selling points in a house, which means you should spend the bulk of your time and resources renovating those rooms. Often a new coat of paint or new carpet can change the entire look of your bedroom and living rooms, and both are relatively inexpensive ways to improve a place.

If you are looking to increase the property value, talk to a realtor before you start your renovations. Your realtor can provide you with insight as to which renovations are worth the money and which ones will not turn a profit. Additionally, your realtor can provide you with current real estate trends so you can see what aspects of a house are selling points with buyers and which ones are not.

Improve instead of renovate

Before you start the project, think about what you want and decide whether or not you have to replace things or simply reface them. For example, if you are renovating your kitchen, ask yourself if you need all new cabinets or if painting or staining your current cabinets will provide your kitchen with the update you are looking for. In addition, you can remove the doors of your current cabinets and attach new ones for far less than the price of installing a complete cabinet system.

Cost

One of the biggest costs in renovating your house comes from materials. By purchasing and transporting materials on your own you can save hundreds of dollars. A contractor or other third party will charge you delivery fees among other hidden fees to pick up and deliver materials to your home. In addition, doing this yourself gives you the option of shopping around, comparing costs and finding items on sale or clearance.

The best way to reduce cost is to go to places and source second hand building material. If you can’t access used materials, then head to thrift stores or larger outdoor stores that sell cheaper items.

Design

Creating a design for your renovation is perhaps the most important aspect in the remodelling process. Use resources of the internet to get an idea of how you want to design things and speak to professionals to get expert advice and tips on how best to approach the renovation and how to work with the space that you have.

Extra help

Some renovations will inevitable require the use of a contractor. If you are not accustomed to working with plumbing or cabinetry, it is wise to invest in a contractor to handle those aspects of the renovation for you. The low cost of doing it yourself is gone, but not knowing what you are doing can cost you a significant amount of extra money in the long run! If you must go the route of hiring a contractor, you can still get things done cheaply by doing smaller tasks yourself. For example, if you hire a contractor to handle your new kitchen, you can paint the kitchen yourself, which will save you several hundred dollars.

Consider these tips!

Before you start your renovation project, consider these DIY home renovation tips. Each will save you time and money on your renovation. Adhering to them will help you increase the property value of your home and maximise your profits by allowing you to see a return on the money you spent remodelling, should you decide to sell your home.

Tips for a Proper Home Inspection

Buying your own shelter is definitely an achievement in itself. But purchasing the right home is not at all easy. There are many things that should be taken into consideration. By hiring a home inspector a proper evaluation of a particular property can be done. This helps to recover any issues and indicate them before one can spend on the house or probably move into them. So, follow this article to find out some of the home inspection tips that can help you spend your money wisely.

Attend the Home Inspection

When a property is being inspected by a real estate agent you should surely attend the inspection. The inspection will take just a few hours. By doing that you would be able to get all the information correctly from the inspector. This will help you find all the issues personally and can save you from making a costly mistake.

No Follow-Up

If issues are found then the inspectors might suggest you some repairing. If you feel they are not much then you can find out the estimate that might be incurred. In some instances, the first home inspector whom you approach might want to take suggestions from another service provider. This can actually be good and help you get a proper third opinion. So, wait for the opinion so that you are ensured about your choice.

Do Not Rely Only On the Inspector

If you have a suspicion you can always go for a professional checkup. This will help you determine in a better way. Another thing that you should be going for is a termite inspection. This will find out if there are termites in the place. So, there will be chances that you will be staying protected from making costly repairs after buying a home.

Home Inspection For New Homes Too

We often think that a newly built home does not need inspection. But we are wrong. This step is very important and should not be avoided. This will indicate how the building has been built and if there are any imperfections.

Additional Tests for Older Homes

If you are buying an older home then you might have to check other things. The tests that should be done are running a camera through the drainage lines, a hydrostatic test in the drains might help to find out leakages in the drainage system. It is one of the important things to remember.

Tips and Tricks for Better Indoor Air

Readers wrote me with questions about air purification in their home. Here’s the latest on actions you can take to improve indoor air quality.

“I’ve heard of a HEPA filter for air conditioning. What is this and should I buy one?”

HEPA stands for High-Efficiency Particulate Air. A HEPA filter works with a powerful fan to force air through a thick pleated mesh that traps pollen, pet dander, dust mites, and smoke. It can filter out nearly all toxic microorganisms including bacteria, mold spores and viruses. Hospitals are one of the largest users of HEPA air filters.

Sounds great, right? Let’s run down to the store and buy one. Wait, not so fast. There are a couple of problems you’ll encounter if you try to put a HEPA filter in your air handler or at the air return ducts. The first one is expense – ten dollars for a vacuum cleaner size filter, and over $200 for commercial air handlers. The second problem is that residential air handlers do not have fans with enough power to push air through HEPA type media.

But there is some good news – since the point of using a fancy filter is to clean the air, there are things you can do to improve the air quality inside. One is to use a HEPA filter in your vacuum cleaner if it is a model that is designed to use HEPA filtration. The other thing you can do is purchase a standalone air purifier, which I’ll cover in a future article.

Without moving to a dedicated air purifier, the following things will help you keep indoor air fresh and clean.

A well-maintained vacuum cleaner, with a HEPA filter, used several times a week on floors and carpets will go a very long way in keeping your home air clean. A non-HEPA vacuum with dirty filters, on the other hand, will actually add dirt and contaminants to the air by picking it up off the floor and re-distributing it into the air.

Changing your air conditioning and heating filters on a schedule, and using high-efficiency air filters. The mid to high-efficiency air conditioning filters sold at the grocery store are very good at trapping nasty particles.

Minimize the use of candles and wood fires if you can. These add to the indoor pollutant load.

Limit use of air fresheners and strong cleaning products.

Don’t smoke indoors.

Use exhaust fans if you have them when you’re cooking, but don’t use them if you have a wood fire going in the fireplace. The fan can draw smoke into the living area from the fireplace.

You can also call an air conditioning contractor to come to your home and quote upgrading your air handler fan to one that will handle a HEPA installation. This is not an inexpensive upgrade, so you may want to try the methods above first, and then consider a standalone air purifier.

Opening windows on nice days will go a long way in cleaning your indoor air. With the Environmental Protection Agency claiming that indoor air is two to five times more polluted than outdoor air, letting the breeze sweep out pollutants will reduce your task list.